It is highly recommended to get high-quality scaffolding for sale from reputed and established companies only. It is also imperative to paint scaffolding for good reasons and the most important reason is to minimise corrosion and decay. All types of scaffolding must be structurally safe and protected so that workers can work without any fears of falling from a height. Due to ecological factors and passage of time, deterioration occurs in scaffolding gradually. The paint covers any defects, spots and uneven patches, so the end product looks brand new. The paint works as a protective layer shielding scaffold from rust formation. Thus, painting the scaffolding is crucial not only for robustness but also for reliability and safety. Now, let’s look at the three top reasons for painting scaffolding.
- WITHSTANDING CLIMATIC CONDITIONS
The framework that is erected professionally is hauled from one site to another. The parts lay in mud-covered puddles; they are taken, put together and erected on bare ground. Painted scaffolds get a coating, which averts the effects of water on metal contact, eliminating the oxidisation (i.e. rust) of the metal beneath. Thus rust formation is halted from spreading and the equipment can’t oxidise and decay.
- SAFETY OF THE STRUCTURE
Temporary setup and erections are firm structures; however, they only use nominal geometrical configurations to attain this advanced engineering effort. Actually, this is a load sharing build as its numerous platforms provide support to the workers as they perform their chores. Therefore, rust should not be permitted to break free and intensify here, as the influence of this metal corrosion can deteriorate the structure. Similarly, a weak link in a chain can damage the chain and a weak point on the metal frame can cause a disaster – when scaffold parts start to weaken then it places the lives of those working on the scaffolding in danger. Thus, maintaining the safety of the structure at all times is vital.
Harsh environmental elements are known to cause damage to the best of construction works. Luckily, sturdy concrete, brick as well as heat treated alloys withstand the storm. Due to the passage of time, these materials don’t lose their strength and their basic properties never fade away.
Scaffolding structure erected for temporary use may not meet this type of unrelenting environmental onslaught; however, metal parts will age regardless of the exposure period. Moreover, metal-oxidisation influence is volatile and changeable. Therefore, painting scaffolding parts is crucial to remove this factor of changeability and infuse the structure with firm strength.
The significance of scaffold painting is associated directly with oxidisation prevention strategy. Use the paint as a protective shield and have the powder coating and dip tanks as a neutral solution here. However, pre-treating the parts is essential, possibly with shot-blasting the fittings so that all layers of dirty film are eliminated before the paint is applied.
DID YOU KNOW?
Usually, tubes and scaffold fittings are galvanised whereas Kwikstage and Cuplock scaffolding systems tend to be painted scaffolding variants. Know more about painted scaffolding versus galvanised scaffolding systems.
Rusted and oxidised scaffolding parts can inflict severe problems with the structural reliability of the scaffolds, which can cause devastating failures and scaffolding collapses. Non-galvanised scaffolding systems that aren’t painted can easily catch corrosion. That’s why it is so important to paint the scaffolds if they aren’t galvanised, to make the structure safe for workers who are working at heights; at the same time, to increase the lifespan of the scaffolding systems.